MBBC Operations Committee 2008 Work Schedule




Many thanks for the
willing help, great attitudes, and service to fellow members!

Rick, Jon and Jonathon

How do we keep this schedule full? Some OpsCom members know their availability months ahead...others know what's going on only a few days out. We need both types, of course, and if we can just keep the next week or two filled, life is good!




MBBC web site

Next event is highlighted in YELLOW

Last modified:
Friday 5/9/08 at 5:43pm

Date Day Task Team Leader(s) Support Personnel
2008 Project List .
  • Move and downsize diesel storage tank, add spill containment vessel
  • Fix water/power/WiFi cables to dock
  • Add gravel at base of trailer ramp (when lake level is low (~95 ft)
  • Upgrade vents on Dock house, rewire elect to meet code
  • ANY Other items that you are working on that I have omitted!
Rick Ritter Jonathon Haas
May 10 Saturday
9AM
Meet at garage door for assignments 		Club Opening

ALL Operations Committee members are requested to attend this gala affair! Black tie only.
See list (below) for a partial listing of jobs 		Rick Ritter
Jon Fick

PROJECT LIST:
  • Commission the pump out system. Install hose and doghouse on work dock,check operation - Team Leader: Jon Fick
  • Range lights: Light near shore needs to be rewired and aligned
  • State Inspection and make roadworthy all five trailers
  • Club dinghies in water. Add oars and life jacket
  • Change filter on diesel tank
  • Move all boats out of club house

FLOATING DOCK:
  • Repair swim platform/check for ice damage/replace 3 barrels
  • Install ramp to the floating docks when lake level drops
  • Install pipes along side of end of floating dock with mooring puller
  • Attach and repair water line
  • Install union and shutoff in water line
  • Remove winter anchors/store in steward's room
  • Position swim platform and anchor with two small mushroom anchors
  • Remove bubblers-pressure wash-store in grounds shed
  • Remove and store shutters on dock house
  • Replace corner bumpers and ladder on floating dock
  • Check electrical power and replace flood light bulbs on dock

DINGHY DOCK:
  • Remove dinghy dock and install in summer position
  • Pickup yellow float and attach line to anchor offshore end of dock
  • Secure dock to shore and install walkway

WORK DOCK:
  • Turn on water to dock
  • Install hose,doghouse and water line for pumpout
  • Check operation of hoist
  • Install side boards
  • Launch mooring puller/attach motor

FUEL TANK:
  • Clear and level area around harbor shed for new fuel tank
  • Install paving blocks on level ground as base for tank area of 4'X6' to be covered with blocks

LAUNCHES:
  • Install grab rails
  • Install battery & check thruhulls
  • Check oil level in motors (synthetic ONLY!!)
  • Clean, install, and check for all safety equipment (fire extinguisher & life jackets)
  • Install new registration stickers and copy of reg in vessel
  • Launch launches
  • On water checkout
  • Need truck to move trailers

WHALERS:
  • Clean boats
  • Fresh fuel in tanks
  • Check oil level in motors (synthetic ONLY!!)
  • Clean, install and check all safety equipment (fire extinguisher & life jackets)
  • Install new registration stickers and copy of reg in vessel
  • Race whaler:
  • Drain plugs installed from outside
  • Launch
  • On water checkout

ZODIAC:
  • Install blue cover
  • Fresh fuel in tank
  • Check oil level in motor (synthetic ONLY!!)
  • Install USCG required safety equipment (fire extinguisher & life jackets)
  • Replace tail light on trailer, install licence plate
  • Install new registration stickers and copy of reg in vessel
  • Launch
  • On water checkout

MOORING PULLER:
  • Install aluminum box
  • Fresh fuel in tank
  • Check oil level in motor (synthetic ONLY!!)
  • Install USCG required safety equipment (fire extinguisher & life jackets)
  • Install radio and verify operation
  • Replace dock lines if req'd
  • Spray silicone in padlock for gray box
  • Update mooring map (see Jonathon Haas)
  • Install new registration stickers and copy of reg under plexi
  • Launch
  • On water checkout
  • Ready ALL boats for Vessel Safety Check by USCG Aux.

Let me know which project interests you to take on!
Thanks....Rick 		.
October 3 Friday
7PM 		MBBC Annual Meeting
. Let's have a good showing of OpsCom members at this important meeting!
October 18 (tentative) Saturday
9AM
Meet at garage door for assignments 		Club Closing

Every OpsCom member should plan on attending to help prepare the club for winter

PROJECT LIST:
  • Decommission the pump out system. Remove hose and doghouse on work dock - Team Leader: Jon Fick
  • Remove all club dinghies from water EXCEPT two. Store boats under porch. Store oars and life jackets in dock house.
FLOATING DOCK:
  • Detach water line/WiFi
  • Secure swim platform to side of floating dock. Take two small mushroom anchors and store in steward's room
  • Install bubblers-stored in grounds shed
  • Install shutters on dock house
  • Remove corner bumpers and ladder on floating dock-store in grounds shed
  • Turn off electrical power and remove flood light bulbs on dock
DINGHY DOCK:
  • Remove dinghy dock and install in winter position
  • Detach dock from shore and remove walkway
WORK DOCK:
  • Turn off water to dock, flush lines
  • Remove hose,doghouse and water line for pumpout
LAUNCHES:
  • Remove grab rails
  • Remove battery & open thruhulls
  • Winterize motors
  • Put in club house
HARBOR WHALER:
  • Remove from water
  • Drain fuel in tank
  • Drain water
  • Remove USCG required safety equipment (fire extinguisher & life jackets)
  • Take boat to be winterized

ZODIAC:
  • Remove from water
  • Drain fuel in tank
  • Drain water
  • Remove USCG required safety equipment (fire extinguisher & life jackets)
  • Take boat to be winterized

Let me know which project interests you to take on!
Thanks....Rick 		.
November 22 Saturday
2-4PM
  • Remove 4 pipes from floating dock
  • Install two winter anchors/stored in steward's room
  • Remove ramp after last J/24 Race
  • Remove race whaler from water
  • Remove mooring puller from water
  • Remove motor and put in race whaler
  • Remove USCG required safety equipment (fire extinguisher & life jackets)
  • Remove radio and store in steward's room after marking ID
  • Remove any other hardware,lines on mooring puller and store
  • Remove aluminum box and store in harbor shed
  • Remove gray box and store in harbor shed
  • Remove any other hardware
  • Spray silicone in lock on harbor shed
  • Remove side boards from work dock
  • Remove all club dinghies from water EXCEPT one. Store oars in harbor shed
  • Take race whaler to be winterized with mooring puller motor
J/24 Racers and OpsCom members
. . . . .